Process of Making Glass Beads
The process of glass beads making is approximately 2000 years old. The process has seen several changes as a result of constantly changing technology. The techniques were kept as trade secrets until the early 17th century. However, later these secrets were shared with the rest of the manufactures and the process of glass bead making became a common practice. One of the most commonly prevalent processes of glass bead making has been described below. However, before you start you must prepare your work area by clearing it for any flammable objects and by keeping all the necessary equipments easily accessible.
Bead Making Process
-
Prepare the metal rod to be used for making the beads called mandrel by rubbing it with a piece of wool. After that, coat the mandrel with a fireproof material in order to enable the beads to be released easily.
-
Put the propane torch that is to be used greatly for making the beads in a secure heatproof or its designated stand. And then, light the torch.
-
Start heating the mandrel by keeping it under flame and constantly bring it out on becoming too hot.
-
Heat the rod slowly by moving it in and out for preventing it from getting overheated and blowing.
-
As the glass rod starts glowing, bring it inside the flame towards the much hotter area.
-
Keep on rotating the glass rod as the glass starts melting until a blob is formed. The molten glass form would resemble thick and consistent honey.
-
Rotate the mandrel in order to coat the melting glass onto its surface.
-
Now, in order to separate the bead from the rest of the body, gently pull the glass rod away from the wounded glass. This will detach the newly formed bead from the melting hot rod.
-
Start rotating the new bead in the hotter section of the flame until it forms an even surface without any irregularities.
-
Rotate this new bead against a heatproof flat surface made of ceramic, metal or graphite, known as a marver in order to give the desired shape.
-
Keep the mandrel into constant rotation until the rod doesn’t lose its glow.
-
Put the new bead into a fiber blanket or heated vermiculite allowing it to stay there for about 30 minutes in order to cool it down.
-
Grasp the mandrel with pliers and the bead with your hand and pull out the bead by twisting it a little in order to separate the bead from its attachment.
-
Finally clean the bead from the surface and from within the bead hole to give the final touch.
You are done now. Make as many glass beads as you can, use them in your bead making process and have tons of fun.
About the Author
For more information about glass beads please visit http://www.houseofgems.com & also visit our blog http://houseofgemsblog.blogspot.com/
How to Make Glass Beads and Rings : Learn About Grinding & Glass Bead Release
|
|
Take Off Them Beads $15.50 … |
|
|
Find Your Way $4.00 … |
|
|
K&L Supply Quick-Release Knob for Bead Buster 37-9023 $57.63 Cuts the time needed to break an ATV bead by 25%Slips over the threaded part of shaft on K&L bead busterSlides into place in less than one secondRequires less than one turn to tighten… |
|
|
Release rates of methylcyclohexenone and verbenone from bubble cap and bead releasers under field conditions suitable for the management of bark … Oregon, and Alaska (SuDoc A 13.78:PNW-RP-544) … |
|
|
The Bead Release: Quarterly Publication of the International Society of Glass Beadmakers (Fall 2005) Volume XII, Issue Four Dog beads, the Louisville Gathering, Rita Maya Burkholder spotlighted artist…. |
|
|
The Bead Release: Quarterly Publication of the International Society of Glass Beadmakers (Winter 2007) Volume XIV, Issue One Encasing: The Basics of Color Theory. Spotlighted artist, Holly Cooper…. |
|
|
Fresh Wave Continuous Release Odor Eliminator Gel, 64-Ounce Jar $29.49 64 OZ, Fresh Wave Continuous Release Super Gel, Refillable Container, Safely Neutralizes and Eliminates Odors, For Continuous-Release Odor Control, Place Near Pet Areas, In Musty Closets, Basement Or Garage Or Other Areas Where Odors Are Stubborn and Lingering, Just Pour Into A Wide Mouth Container…. |
|
|
Easy Release Tri Cock and Ball Ring $3.99 Made to be stimulating, this cock ring will go around your balls, shaft and base of cock and balls. Once put on, you will experience stronger, longer erections as well as mind blowing orgasms! Made from silicone, this cock ring will feel and fit great. Any of the three rings can be cut down to size for an quick and easy personalized fit…. |
|
|
Clean & Clear Morning Burst Detoxifying Facial Cleanser with Oxygen-Infused Formula, 8-Ounce Pump Bottle … |
|
|
Tizo Design Siena Flat Bead With Round Corner Collection 8×10 Frame – Silver Plated $36.99 … |
